2025 Wacker Neuson Compact Track Loaders ST27
- Year 2025
- Make Wacker Neuson
- Model Compact Track Loaders
- Engine Designation: KDI2504TCR
2025 Wacker Neuson Compact Track Loaders ST27
Small But FierceThe ST27 offers a compact design, outstanding visibility and operator comfort features that make it a perfect fit for any job. The trim package, low weight and ability to lift heavier loads, compared to similar machines in this class, make it especially productive for smaller job sites. The ST27 is powered by a Kohler turbocharged engine offering high horsepower, superior torque and large fuel capacity to operate longer and get more done. The vertical lift arms allow excellent lift and dump height for maximum efficiency and flexibility on the job site.
Features may include:
- Controls for Every Operator
- Two-speed transmission
- 5.7-inch Color Display
- Maintenance and Filter Free After-treatment
- Expansive Maintenance Access
Engine
Cooling
Water-cooling
Cylinder Liners
4.0
Engine Power
74.3 hp
Rated Engine Speed
2,600.0 1/min
Engine Manufacturer
Kohler
Engine
Designation: KDI2504TCR
Electric
Electrical
Starter battery Voltage: 12.0 V
Operational
Ground Pressure
4.4 psi
Operating Conditions
Breakout force - tilt: 5,404.2 lbf | Breakout force - lift: 4,783.3 lbf | Tractive Effort max. at 100% effective force: 7,476.9 lbf
Cycle Time
Bucket Roll Back: 2.1 s | Bucket Roll Out: 2.2 s | Lift Arm Raise: 3.3 s | Lift arm lower: 2.8 s
Operating Speed
Travel stage 1: 6.4 m/H | Travel stage 2: 9.1 m/H
Hydraulics
Hydraulic Flow
rate: 19.3 gal/m | rate max: 28.8 gal/mi
Maximum Pressure
Auxiliary hydraulics relief: 3,480.0 psi
Dimensions
Overall Length
with bucket: 132 in | without bucket: 102.5 in
Overall Width
with bucket: 63.5 in | without bucket: 60 in
Overall Height
79.8
Length
of track on ground: 53.2 in
Height
Hinge pin: 120 in | Dump max: 94.3 in |
Dimensions
Dump angle: 37 ° | Bucket rollback at max. stroke height: 95.5 ° | Dump reach: 39.2 in | Bucket rollback at ground level: 30 ° | Angle of departure: 29.9 °
Ground Clearance
8.5 in
Capacities
Oil capacity
filling max: 2.5 gal US
Hydraulic Capacity
30.6 qt US
Fuel Capacity
Tank: 27.2 gal US
Load Capacity, Land
Tip Load: 5,401.3 lb | Rated Operating Capacity at 35% Tip Load: 1,889.4 lb