2025 Wacker Neuson Compact Track Loaders ST27

2025 Wacker Neuson Compact Track Loaders ST27

Swipe to View More

  • Year 2025
  • Make Wacker Neuson
  • Model Compact Track Loaders
  • Engine Designation: KDI2504TCR
2025 Wacker Neuson Compact Track Loaders ST27

2025 Wacker Neuson Compact Track Loaders ST27

2025 Wacker Neuson Compact Track Loaders ST27

Small But Fierce

The ST27 offers a compact design, outstanding visibility and operator comfort features that make it a perfect fit for any job. The trim package, low weight and ability to lift heavier loads, compared to similar machines in this class, make it especially productive for smaller job sites. The ST27 is powered by a Kohler turbocharged engine offering high horsepower, superior torque and large fuel capacity to operate longer and get more done. The vertical lift arms allow excellent lift and dump height for maximum efficiency and flexibility on the job site.

Features may include:

  • Controls for Every Operator
  • Two-speed transmission
  • 5.7-inch Color Display
  • Maintenance and Filter Free After-treatment
  • Expansive Maintenance Access

Engine

Cooling Water-cooling
Cylinder Liners 4.0
Engine Power 74.3 hp
Rated Engine Speed 2,600.0 1/min
Engine Manufacturer Kohler
Engine Designation: KDI2504TCR

Electric

Electrical Starter battery Voltage: 12.0 V

Operational

Ground Pressure 4.4 psi
Operating Conditions Breakout force - tilt: 5,404.2 lbf | Breakout force - lift: 4,783.3 lbf | Tractive Effort max. at 100% effective force: 7,476.9 lbf
Cycle Time Bucket Roll Back: 2.1 s | Bucket Roll Out: 2.2 s | Lift Arm Raise: 3.3 s | Lift arm lower: 2.8 s
Operating Speed Travel stage 1: 6.4 m/H | Travel stage 2: 9.1 m/H

Hydraulics

Hydraulic Flow rate: 19.3 gal/m | rate max: 28.8 gal/mi
Maximum Pressure Auxiliary hydraulics relief: 3,480.0 psi

Dimensions

Overall Length with bucket: 132 in | without bucket: 102.5 in
Overall Width with bucket: 63.5 in | without bucket: 60 in
Overall Height 79.8
Length of track on ground: 53.2 in
Height Hinge pin: 120 in | Dump max: 94.3 in |
Dimensions Dump angle: 37 ° | Bucket rollback at max. stroke height: 95.5 ° | Dump reach: 39.2 in | Bucket rollback at ground level: 30 ° | Angle of departure: 29.9 °
Ground Clearance 8.5 in

Capacities

Oil capacity filling max: 2.5 gal US
Hydraulic Capacity 30.6 qt US
Fuel Capacity Tank: 27.2 gal US
Load Capacity, Land Tip Load: 5,401.3 lb | Rated Operating Capacity at 35% Tip Load: 1,889.4 lb

Product Photography